Station, Object, Action, New Serial, Old Serial#, StartDate,EndDate,TaskName,Notes1,Notes2,Notes3 "" "" "" "" "" 02/04/2009 02/04/2009 "Annual Calibration09" "April 2nd, 2009The calibration was carried out on April 2nd 2009." "" "" "" "Benchmark" "Installed" "" "" 12/05/2010 12/05/2010 "Install benchmark 5 near the diving locker room" "May 12, 2010 from 8:15 to 15:45 Benchmark Installation -Benchmark 5 was installed on My 12, 2010. Near the diving locker room. This benchmark is sitting a few milimeters higher than the previous red-mark placed on the concrete on Jan 17, 2010." "" "" "Lab Building Roof" "Telemetry" "Replaced" "32738" "22785" 12/05/2010 12/05/2010 "Replace radio" "May 12, 2010 from 8:15 to 15:45 Replaced Radios -New radio installed on the lab, RF401 S/N:32738 Radio settings: Auto-sense, Pakbus aware, Hop-seq 6, Net-address 0 -Removed lab radio RF400 S/N:22785" "" "" "Platform Tower" "Pyranometer" "Replaced" "61708" "48833" 01/04/2009 01/04/2009 "Replace North Pyranometer" "April 1st, 2009The pyranometers at Bocas were replaced on March 31, 2009, but effectively the pyranometers only went into operation on April 1st, 2009 at 15:36. Serial numbers of the Pyranometers installed: North LI-COR PY61708 Serial numbers of the py" "ranomters taken out: North LI-COR PY48833 The arm where the pyranometers are installed was properly leveled and fixed in place (on the tower) with two screws. Each pyranomter sits on top of a piece of flat PVC plastic, which is mounted on a wooden plan" "k. One of the wooden planks is bent and tha t makes it dificult to level the pyranometer. The wooden planks should be replaced by aluminum channels." "Platform Tower" "Pyranometer" "Replaced" "61697" "48820" 01/04/2009 01/04/2009 "Replace South Pyranometer" "April 1st, 2009The pyranometers at Bocas were replaced on March 31, 2009, but effectively the pyranometers only went into operation on April 1st, 2009 at 15:36. Serial numbers of the Pyranometers installed: South LI-COR PY61697 Serial numbers of the py" "ranomters taken out: South LI-COR PY48820 The arm where the pyranometers are installed was properly leveled and fixed in place (on the tower) with two screws. Each pyranomter sits on top of a piece of flat PVC plastic, which is mounted on a wooden plan" "k. One of the wooden planks is bent and tha t makes it dificult to level the pyranometer. The wooden planks should be replaced by aluminum channels." "Platform Tower" "Anemometer" "Replaced" "40007" "59509" 01/04/2009 01/04/2009 "Replace Anemometer" "April 1st, 2009The anemometer was replaced on April 1st, 2009 and the new anemometer went into operation on this same day at 15:36. The serial number of the new (istalled) anemometer RM Young 05103 is SN#40007 The serial number of the anemomter RM Youn" "g 05103 taken out is SN#59509 The anemomter wiring on the control box was set the following way: -Earth GND - Shield ------------------------------- G -WS REF - Black --------------------------------G -WD REF - White --------------------------" "------ AG -WD SIG - Green --------------------------------4H -WD EXC - Orange ------------------------------ E1 -WS SIG - RED ---------------------------------- P2" "Platform Tower" "" "Observation" "" "" 02/02/2009 06/02/2009 "Take measurements of Platform" "Feb. 4th, 2009No need to take measurements in advance - we only need to replace the planks. All of them are of different lengths and can be purchased locally." "" "" "Platform Tower" "Telemetry" "Repaired" "" "" 03/04/2009 03/04/2009 "Fix radio link" "Feb.4th, 2009Initial temporary solution: The problem was initially resolved on Feb. 04, 09. The radio address settings had been altered. Also, something changed in the surroundigs - probably a new power cable installed in the library - now it requires a" " Yagi to connect from the library to the platform. The system was not allowed to remain connected due to the proximity between the Yagi installed and the people working in the library. April 3rd, 2009 Final solution: On April 3rd, 2009 the base radio wa" "s relocated to office number 2, above the boat shop. A new LAN port was installed by the OIT department. The new LAN port number: OM-TC1-B06. The radio link was re-established at 13:00. The system is operating with a D ipole antenna." "Platform Tower" "Tide Gauge" "Repaired" "" "" 03/04/2009 03/04/2009 "Fix Tide Gauge" "Feb. 4th, 2009Not working after new logger installed - must also replace the attachement bolt for the gauge. April 3rd, 2009 The tide gauge went back into operation on April 3rd at 8:30 a.m. There was a problem with the wiring of the gauge, which was fi" "xed on this date." "" "Platform Tower" "Tide Gauge" "Observation" "" "" 04/02/2009 04/02/2009 "Tide Gauge not working" "Feb. 4th, 2009Not working after new logger installed - must also replace the attachement bolt for the gauge. April 3rd, 2009 The tide gauge went back into operation on April 3rd at 8:30 a.m. There was a problem with the wiring of the gauge, which was fi" "xed on this date." "" "Platform Tower" "Datalogger" "Replaced" "X35152" "X39060" 04/02/2009 04/02/2009 "Replace Logger by Calibrated one" "A calibrated CR10x logger was installed at Bocas on Feb. 4, 2009 - S/N X35152The logger taken out of bocas was CR10x S/N: X39060" "" "" "Platform Tower" "T&H sensor" "Replaced" "Y3250082" "300868" 04/08/2009 04/08/2009 "Replace T&RH with new model" "Installed Temp&RH sensor HMP45C S/N Y3250082Unistalled Temp&RH sensor CS500 S/N 300868 Uploaded new program to the logger. New program name: bt_tower20090804kk.dld Old program name: bt_tower_20090403.dld The new program was uploaded at 15:10 on" " 2009-08-04 The 2009,216,15:15 line of data on bt_tower.dat has bad data. The next line with good data is at 15:30." "" "Platform Tower" "Datalogger" "Reprogrammed" "" "" 04/08/2009 04/08/2009 "Reprogram datalogger" "Uploaded new program to the logger. New program name: bt_tower20090804kk.dldOld program name: bt_tower_20090403.dld The new program was uploaded at 15:10 on 2009-08-04 The 2009,216,15:15 line of data on bt_tower.dat has bad data. The next line with good" " data is at 15:30." "" "Platform Tower" "Battery" "Replaced" "" "" 05/02/2010 05/02/2010 "Replace Battery" "Bocas Feb. 5th, 2010 Battery Replaced the battery by a 12, 17AH battery. The previous battery was no longer holding its voltage during the nighttime." "" "" "Platform Tower" "Telemetry" "Repaired" "" "" 05/02/2010 05/02/2010 "Radios not working. Replaced battery and moved antena. Now working" "Bocas Feb. 5th, 2010 Radios The radios were not working. After moving the antenna to the top of the tower and replacing the battery the radios returned to normal operation." "" "" "Platform Tower" "Datalogger" "Reprogrammed" "" "" 05/02/2010 05/02/2010 "Loaded a new program" "Bocas Feb. 5th, 2010 Program Loaded a new program w/ same logic as the previous one (bt_tower20100117.dld - this program got corrupted) but built with Loggernet 3.4.1. The new program is bt_tower20100205kk.dld. The station was down on Feb. 5, 2010 betwe" "en 8:45 a.m. and 9:33 a.m. 0 0 0 0 0 0 1 <" "CommitmentType>0 188743731 Bocas 83A773A4-8FF5-443B-B587-E8D358E7BE88 188743734